/interface/ethernet/poe/monitor
monitor
/interface/ethernet/poe/monitor 的 RouterOS 命令参考。
interface/ethernet/poe/monitor
Syscap: (poe or poe-in) Type: Command
| 只读参数 | 类型 | 描述 |
|---|---|---|
name | string | |
port-type | enum (poe-out | poe-in | poe-in/poe-out) { poe-out:0, poe-in:1, poe-in/poe-out:2 } | |
poe-out | enum (off | auto-on | forced-on | forced-on-a | forced-on-bt) { off:0, auto-on:1, forced-on:2, forced-on-a:3, forced-on-bt:4 } | |
poe-voltage | enum (auto | low | high) { auto:0, low:1, high:2 } | PoE 输出供电电压选择 |
poe-out-status | enum (disabled | waiting-for-load | powered-on | overload | short-circuit | voltage-too-low | current-too-low | power-cycle | voltage-too-high | controller-error | controller-upgrade | voltage-on-poe-in | no-valid-PSU | controller-init | low-voltage-too-low | lldp-power-off | low-voltage-pd-detected) { disabled:1, waiting-for-load:2, powered-on:3, overload:4, short-circuit:5, voltage-too-low:6, current-too-low:7, power-cycle:8, voltage-too-high:9, controller-error:10, controller-upgrade:11, voltage-on-poe-in:12, no-valid-PSU:13, controller-init:14, low-voltage-too-low:15, lldp-power-off:16, low-voltage-pd-detected:17 } | |
poe-out-voltage | num | |
poe-out-current | num | |
poe-out-power | num | |
poe-out-power-pair | enum (b | a | bt) { b:0, a:1, bt:2 } | |
power-cycle-host-alive | bool | |
power-cycle-after | time |