/interface/bonding/monitor-slaves
当前显示英文原文，切换到「中文」可查看译文。
monitor-slaves
Command is used to monitor individual bonding ports.
interface/bonding/monitor-slaves
Type: Command
Command is used to monitor individual bonding ports.
| Flag | Name | Description |
|---|---|---|
A | active | active |
P | partner | partner |
| Argument | Type | Description |
|---|---|---|
bond | iface_enum | Bonding interface to monitor. |
once | bool | Show the monitor output once instead of continuously. |
| Read-only Argument | Type | Description |
|---|---|---|
port | iface_enum | Used bonding port. |
key | num | Shows the local LACP aggregation key. The lower 6 bits are automatically assigned based on individual port link speed and duplex. The upper 10 bits can be manually specified using the lacp-user-key setting. |
flags | string | Shows the local LACP flags. - A - activity (link is active). - T - timeout (link is using short timeout). - G - aggregation (link can be aggregatable). - S - synchronization (link is synchronized). - C - collecting (link is able to collect incoming frames). - D - distributing (link is able to distribute outgoing frames). - F - defaulted (link is using defaulted partner information). - E - expired (link has expired state). |
partner-sys-id | macAddr | Shows the partner LACP system ID. |
partner-sys-priority | num | Shows the partner LACP priority. |
partner-key | num | Shows the partner LACP aggregation key. |
partner-flags | string | Shows the partner LACP flags. |