/interface/bridge/port/monitor

官方原文约 3 分钟阅读

当前显示英文原文，切换到「中文」可查看译文。

monitor

RouterOS command reference for /interface/bridge/port/monitor.

Type: Command

Read-only Argument	Type	Description
`interface`	alt { interface: iface_enum , interface-list: enum }
`status`	enum (inactive \| in-bridge \| in-bridge \| disabled)
`port-id`	composite { priority: num , number: num }
`role`	enum (disabled-port \| root-port \| designated-port \| alternate-port \| backup-port) { disabled-port:0, root-port:1, designated-port:2, alternate-port:3, backup-port:4 }
`edge-port`	bool
`edge-port-discovery`	bool
`point-to-point-port`	bool
`external-fdb`	bool
`sending-rstp`	bool
`learning`	bool
`forwarding`	bool
`actual-path-cost`	num
`root-path-cost`	num
`internal-root-path-cost`	num
`designated-bridge-id`	composite { number: num , address: macAddr }
`designated-cost`	num
`designated-internal-cost`	num
`designated-port-id`	composite { priority: num , number: num }
`designated-message-age`	num
`designated-max-age`	num
`designated-remaining-hops`	num
`tx-rx-bpdu`	composite { tx: num , rx: num }
`discard-transitions`	num
`forward-transitions`	num
`tx-rx-tc`	composite { tx: num , rx: num }
`topology-changes`	num
`last-topology-change`	time
`multicast-router`	bool
`hw-offload-group`	enum
`declared-vlan-ids`	multi { vlan-range: range }
`registered-vlan-ids`	multi { vlan-range: range }