/interface/wireless/monitor
当前显示英文原文，切换到「中文」可查看译文。
monitor
RouterOS command reference for /interface/wireless/monitor.
interface/wireless/monitor
Package: wireless-rep Type: Command
| Read-only Argument | Type | Description |
|---|---|---|
status | enum (disabled | searching-for-network | connected-to-ess | initializing | searching-for-frequency | radar-detecting | running-ap | tkip-countermeasures | nstreme-dual-slave) { disabled:0, searching-for-network:1, connected-to-ess:2, initializing:3, searching-for-frequency:100, radar-detecting:101, running-ap:102, tkip-countermeasures:103, nstreme-dual-slave:200 } | |
status-reason | string | |
channel | string | |
wireless-protocol | enum (802.11 | nstreme | nv2) { 802.11:1, nstreme:2, nv2:3 } | |
nstreme-status | enum (ok | degraded) | |
tx-rate | string | |
rx-rate | string | |
ssid | string | |
bssid | macAddr | |
radio-name | string | |
signal-strength | num | |
signal-strength-ch0 | num | |
signal-strength-ch1 | num | |
signal-strength-ch2 | num | |
signal-strength-ch3 | num | |
tx-signal-strength | num | |
tx-signal-strength-ch0 | num | |
tx-signal-strength-ch1 | num | |
tx-signal-strength-ch2 | num | |
tx-signal-strength-ch3 | num | |
noise-floor | num | |
signal-to-noise | num | |
tx-ccq | num | |
rx-ccq | num | |
p-throughput | num | |
overall-tx-ccq | num | |
registered-clients | num | |
authenticated-clients | num | |
current-ack-timeout | num | |
current-distance | num | |
wds-link | bool | |
bridge | bool | |
nstreme | bool | |
polling | bool | |
csma-disabled | bool | |
framing-mode | enum (none | best-fit | exact-size) { none:0, best-fit:2, exact-size:3 } | |
framing-limit | num | |
framing-current-size | num | |
routeros-version | string | |
last-ip | ipAddr | |
802.1x-port-enabled | bool | |
authentication-type | enum (wpa-psk | wpa2-psk | wpa-eap | wpa2-eap) { wpa-psk:0, wpa2-psk:1, wpa-eap:2, wpa2-eap:3 } | |
encryption | enum () | |
group-encryption | enum () | |
management-protection | bool | |
compression | bool | |
wmm-enabled | bool | |
nv2-sync-state | enum (searching | syncing | synced) { searching:0, syncing:1, synced:2 } | |
nv2-sync-master | macAddr | |
nv2-sync-distance | num | |
nv2-sync-period-size | num | |
nv2-sync-downlink-ratio | num | |
current-tx-powers | multi { current-tx-power: super { rate: enum () , [tx-power] :num , [tx-power-real] (num , tx-power-total: num } } | |
current-ofdm-errors | num | |
current-cck-errors | num | |
1s-frames | composite { compressed: num , total: num } | |
1s-compressed-frames | num | |
1s-bytes | composite { compressed: num , total: num } | |
1s-length-of-orig | num | |
total-frames | composite { compressed: num , total: num } | |
total-compressed-frames | num | |
total-bytes | composite { compressed: num , total: num } | |
total-length-of-orig | num | |
notify-external-fdb | bool | |
cloned-mac-address | macAddr | |
searching-for-address-to-clone | bool |