/mpls/ldp
当前显示英文原文，切换到「中文」可查看译文。
ldp
RouterOS directory reference for /mpls/ldp.
mpls/ldp
Conditions: !smips Type: Directory
| Flag | Name | Description |
|---|---|---|
X | disabled | disabled |
I | inactive | inactive |
| Argument | Type | Description |
|---|---|---|
lsr-id | ipAddr | Unique label switching router's ID. |
path-vector-limit | num | Max path vector limit used for loop detection. Works in combination with the loop-detect property. |
hop-limit | num | Max hop limit used for loop detection. Works in combination with the loop-detect property. |
loop-detect | bool | Defines whether to run LSP loop detection. Will not work correctly if not enabled on all LSRs. Should be used only on non-TTL networks such as ATMs. |
use-explicit-null | bool | Whether to distribute explicit-null label bindings. |
distribute-for-default | bool | Defines whether to map label for the default route. |
transport-addresses | multi { array-id, transport-address: address (flags=46) } | Specifies LDP session connection origin addresses and also advertises these addresses as transport addresses to LDP neighbors. |
vrf | enum | Name of the VRF table this instance will operate on. |
afi | ubit (ip, ipv6) | Determines supported address families by the instance. |
preferred-afi | enum (ip | ipv6) | Determines which address family connection is preferred. Value is also set in dual-stack element (if used). |