/routing/ospf/area
当前显示英文原文，切换到「中文」可查看译文。
area
RouterOS directory reference for /routing/ospf/area.
routing/ospf/area
Type: Directory
| Flag | Name | Description |
|---|---|---|
X | disabled | disabled |
I | inactive | inactive |
D | dynamic | dynamic |
T | transit-capable | transit-capable |
| Argument | Type | Description |
|---|---|---|
name | string | The name of the area |
instance * | enum | Name of the OSPF instance this area belongs to. |
area-id | ipAddr | OSPF area identifier. If the router has networks in more than one area, then an area with area-id=0.0.0.0 (the backbone) must always be present. The backbone always contains all area border routers. The backbone is responsible for distributing routing information between non-backbone areas. The backbone must be contiguous, i.e. there must be no disconnected segments. However, area border routers do not need to be physically connected to the backbone - connection to it may be simulated using a virtual link. |
type | enum (default | stub | nssa) | The area type. Read more on the area types in the OSPF user guides. |
no-summaries | switch | Flag parameter, if set then the area will not flood summary LSAs in the stub area. |
default-cost | num | Default cost of injected LSAs into the area. If the value is not set, then stub area type-3 default LSA will not be originated. |
nssa-translator | enum (candidate | no | yes) | The parameter indicates which ABR will be used as a translator from type-7 to type-5 LSA. Applicable only if area type is NSSA. - yes - the router will be always used as a translator. - no - the router will never be used as a translator. - candidate - OSPF elects one of the candidate routers to be a translator. |
| Read-only Argument | Type | Description |
|---|---|---|
transit-capable | bool |