/snmp/send-trap
当前显示英文原文，切换到「中文」可查看译文。
send-trap
The send-trap command sends one SNMP trap to the configured trap target immediately, which is useful for testing that traps reach the collector. The trap uses the trap-target, trap-community, and trap-version...
snmp/send-trap
Type: Command
The send-trap command sends one SNMP trap to the configured trap target immediately, which is useful for testing that traps reach the collector. The trap uses the trap-target, trap-community, and trap-version settings of the SNMP service (with trap-version=1 it is a classic v1 enterprise trap; otherwise it carries the OID and value under the MikroTik trap OID 1.3.6.1.4.1.14988.1.1.9.0.1). See the SNMP guide for the trap configuration.
| Argument | Type | Description |
|---|---|---|
oid | string | OID of the object the trap reports. |
type | enum (integer | string | nullobj | obj-id | ip-address | counter32 | timeticks | unsigned) { integer:0x02, string:0x04, nullobj:0x05, obj-id:0x06, ip-address:0x40, counter32:0x41, timeticks:0x43, unsigned:0x47 } | SNMP type of the value. Accepted values: - integer - A signed integer. - string - An octet string. - nullobj - A NULL value. - obj-id - An object identifier. - ip-address - An IP address. - counter32 - A 32-bit counter. - timeticks - A time in hundredths of a second. - unsigned - An unsigned integer. |
value | string | Value to send, in the format the selected type expects. |