/system/health
当前显示英文原文，切换到「中文」可查看译文。
health
Hardware health monitoring on x86 (i386) based devices. Use /system/health/print to read the sensor values.
system/health
Conditions: i386 Type: Settings Directory
Hardware health monitoring on x86 (i386) based devices. Use /system/health/print to read the sensor values.
| Argument | Type | Description |
|---|---|---|
state-after-reboot | enum (disabled | enabled) | Enables or disables hardware health monitoring after a reboot. |
| Read-only Argument | Type | Description |
|---|---|---|
core | num | CPU core voltage. |
3.3v | num | 3.3 V supply line voltage. |
5v | num | 5 V supply line voltage. |
12v | num | 12 V supply line voltage. |
lm87-temp | num | Temperature measured by the LM87 sensor. |
cpu-temp | num | CPU temperature. |
board-temp | num | Board temperature. |
voltage1 | num | Voltage measured by sensor 1. |
voltage2 | num | Voltage measured by sensor 2. |
voltage3 | num | Voltage measured by sensor 3. |
voltage4 | num | Voltage measured by sensor 4. |
voltage5 | num | Voltage measured by sensor 5. |
voltage6 | num | Voltage measured by sensor 6. |
voltage7 | num | Voltage measured by sensor 7. |
voltage8 | num | Voltage measured by sensor 8. |
voltage9 | num | Voltage measured by sensor 9. |
voltage10 | num | Voltage measured by sensor 10. |
temp1 | num | Temperature measured by sensor 1. |
temp2 | num | Temperature measured by sensor 2. |
temp3 | num | Temperature measured by sensor 3. |
fan1 | num | Speed of fan 1 in RPM. |
fan2 | num | Speed of fan 2 in RPM. |
fan3 | num | Speed of fan 3 in RPM. |
state | enum (disabled | enabled) | Health monitoring state. |
system/health
Conditions: !i386 Syscap: health Type: Directory
Hardware health monitoring on non-x86 devices. Use /system/health/print to list the name, current value and type of each monitored parameter.
| Read-only Argument | Type | Description |
|---|---|---|
name | string | Name of the monitored parameter, for example voltage, cpu-temperature or fan1-speed. |
value | alt { valuet: num , valuer: num , valuev: num , valuea: num , valuew: num , valueb: enum (ok | fail | not-present | idle | no-input) { ok:0, fail:1, not-present:2, idle:3, no-input:4 } , values: string } | Current value of the parameter. The value and its unit depend on the parameter type. |
type | enum (C | RPM | V | A | W | | ) | Type of the measured value: C is degrees Celsius, RPM is fan speed, V is voltage, A is current and W is power consumption. |