/system/ntp/client/servers
当前显示英文原文，切换到「中文」可查看译文。
servers
NTP servers of the client. Static entries are added here or with servers in /system/ntp/client; entries learned from DHCP (when the DHCP client has use-peer-ntp=yes) are dynamic. See the NTP guide.
system/ntp/client/servers
Type: Directory
NTP servers of the client. Static entries are added here or with servers in /system/ntp/client; entries learned from DHCP (when the DHCP client has use-peer-ntp=yes) are dynamic. See the NTP guide.
| Flag | Name | Description |
|---|---|---|
X | disabled | The entry is disabled. |
D | dynamic | Dynamic entry, learned from DHCP. Dynamic entries cannot be edited. |
| Argument | Type | Description |
|---|---|---|
address * | address (flags=46D) | IP address or domain name of the NTP server. IPv4 and IPv6 addresses can carry a @vrf suffix, and a link-local IPv6 address an %interface suffix. Domain names are resolved with /ip/dns; the result shows in resolved-address. |
min-poll | num | Shortest interval between queries to this server, as the power of 2 in seconds (6 means every 64 s). Must be lower than max-poll. Range: 3..17. Default: 6. |
max-poll | num | Longest interval between queries to this server, as the power of 2 in seconds (10 means every 1024 s). Range: 3..17. Default: 10. |
iburst | bool | When enabled, the client sends a burst of about a second interval queries right after the server is added, to get an initial estimate quickly. Default: yes. |
auth-key | enum (none) { none:0 } | Key from /system/ntp/key used to authenticate replies from this server. Replies that fail authentication are rejected (crypto NAK) and the client does not synchronize. Default: none. |
| Read-only Argument | Type | Description |
|---|---|---|
resolved-address | address (flags=46) | IP address that the domain name in address resolved to. |