Wi-Fi 5 (802.11ac)

官方原文约 5 分钟阅读

当前显示英文原文，切换到「中文」可查看译文。

MikroTik 802.11ac (Wi-Fi 5) ARM devices can be driven two ways: through the new /interface/wifi menu using the wifi-qcom-ac package (WPA3, fast roaming, new CAPsMAN) or through the legacy /interface/wireless menu...

Wi-Fi 5 (802.11ac)

This section covers MikroTik 802.11ac (Wi-Fi 5) ARM-based devices. These products are special: the same hardware can be configured through either of two RouterOS menus, depending on which driver package is installed. Pick the one that matches the features you need.

警告

wifi-qcom-ac drivers are very resource-heavy. We suggest using our WiFi 5 (802.11ac) devices with their original wireless drivers as they are lightweight.

Two ways to run an 802.11ac device

If you need…	Install package	Configure under	Documentation
WPA3, fast roaming (802.11r), the new CAPsMAN	`routeros` + `wifi-qcom-ac`	`/interface/wifi`	Wi-Fi 6 / 7 (802.11ax/be) — the `/interface/wifi` menu is shared
Nstreme, Nv2, WDS, HWMP+ mesh, the old CAPsMAN	`routeros` + `wireless`	`/interface/wireless`	802.11 a/b/g/n — the `/interface/wireless` menu is shared

You cannot use both packages at the same time on the built-in radios — see Replacing the 'wireless' package for how to switch.

信息

The new /interface/wifi menu manages Wi-Fi 5 wave2 and newer interfaces, so 802.11ac devices running wifi-qcom-ac use exactly the same configuration as the 802.11ax/be devices documented under Wi-Fi 6 / 7 (802.11ax/be). This section therefore links to that reference rather than duplicating it.

Devices with a choice of driver

The following 802.11ac ARM models can run either wifi-qcom-ac (new /interface/wifi menu) or wireless (legacy /interface/wireless menu):

Audience, Audience LTE kit, Chateau (all variants of D53), hAP ac², hAP ac³, cAP ac, cAP XL ac, LDF 5 ac, LHG XL 5 ac, LHG XL 52 ac, NetMetal ac², mANTBox 52 15s, wAP ac (RBwAPG-5HacD2HnD), SXTsq 5 ac

警告

The wifi-qcom-ac driver upgrade is primarily meant for indoor devices. Even though it can also be installed on our outdoor models (LDF 5 ac, LHG XL 5 ac, LHG XL 52 ac, NetMetal ac², mANTBox 52 15s, SXTsq 5 ac), wifi-qcom-ac is not tailored for outdoor usage. This is primarily because the drivers do not support the distance setting, which is required for links longer than 2 km. We therefore recommend using the wireless drivers on all our outdoor boards. For choosing packages by device type and CAPsMAN scenario, see the decision tables on the Wireless overview.